Glasgow Where Protection Is Required ordinance (§ 705.060)

A. An approved backflow prevention device shall be installed on each service line to a consumer's water system serving premises, where in the judgement of the Water Purveyor or the Missouri Department of Natural Resources, actual or potential hazards to the public potable water system exist. The type and degree of protection required shall be commensurate with the degree of hazard.

B. An approved air-gap separation or reduced pressure principle backflow prevention device shall be installed at the service connection or within any premises where, in the judgement of the Water Purveyor or the Missouri Department of Natural Resources, the nature and extent of the activities on the premises, or the materials used in connection with the activities, or materials stored on the premises, would present an immediate and dangerous hazard to health should a cross-connection occur, even though such cross-connection may not exist at the time that the backflow prevention device is required to be installed. This includes but is not limited to the following situations:

1. Premises having an auxiliary water supply, unless the quality of the auxiliary supply is acceptable to the Water Purveyor and the Missouri Department of Natural Resources.

2. Premises having internal cross-connections that are not correctable, or intricate plumbing arrangements which make it impractical to ascertain whether or not cross-connections exist.

3. Premises where entry is restricted so that inspections for cross-connections cannot be made with sufficient frequency or at sufficiently short notice to assure that cross-connections do not exist.

4. Premises having a repeated history of cross-connections being established or reestablished.

5. Premises, which due to the nature of the enterprise therein, are subject to recurring modification or expansion.

6. Premises on which any substance is handled under pressure so as to permit entry into the water supply, or where a cross-connection could reasonably be expected to occur. This shall include the handling of process waters and cooling waters.

7. Premises where materials of a toxic or hazardous nature are handled such that if a backsiphonage or backpressure should occur, a serious health hazard may result.

C. The following types of facilities fall into one (1) or more of the categories of premises where an improved air-gap separation or reduced pressure principle backflow prevention device is required by the Water Purveyor and the Missouri Department of Natural Resources to protect the public water supply and must be installed at these facilities unless all hazardous or potentially hazardous conditions have been eliminated or corrected by other methods to the satisfaction of the Water Purveyor and the Missouri Department of Natural Resources:

1. Aircraft and missile plants.

2. Automotive plants.

3. Auxiliary water systems.

4. Beverage bottling plants.

5. Breweries.

6. Building complexes.

7. Canneries, packing houses and production houses.

8. Car washing facilities.

9. Chemical manufacturing, processing, compounding or treatment plants.

10. Chemically contained water systems.

11. Civil works.

12. Dairies and cold storage plants.

13. Film laboratories.

14. Fire protection systems.

15. Hazardous waste storage and disposal sites.

16. Hospitals, mortuaries, clinics.

17. Irrigation and sprinkler systems.

18. Laundries and dye works.

19. Metal manufacturing, cleaning, processing and fabricating plants.

20. Oil and gas production, storage and transmission properties.

21. Paper and paper products plants.

22. Plating plants.

23. Power plants.

24. Printing and publishing facilities.

25. Radioactive material processing plants and nuclear reactors.

26. Research and analytical laboratories.

27. Rubber plants, natural and synthetic.

28. Sand and gravel plants.

29. Schools and colleges.

30. Sewage and storm drainage facilities - pumping stations.

31. Waterfront facilities and industries.

32. Zoological and horticultural gardens.